Others - Epson ML-13000 User Manual

ML-13000 User's Manual

Others

Product
2 inch Feeding Spindle
3 inch Feeding Spindle
Grease pump
Blade supports
Blade
Glue blocks
Felt rod
Glue collection bucket
Felt weight
Cleaning stick
Cleaning cloth
Insulating tape
Maintenance liquid
Cleaning kit
Waste ink bottle
Wiper roll
Washing scraper
Mist filter
Appendix
Product No.
C12C938611
C12C938621
C12C938631
C12C938641
C12C938651
C12C938661
C12C938671
C12C938681
C12C938851
C13S090011
C13S210050
C13S400213
C13T42X000
C13S210103
C13S210071
C13S210128
C13S210132
C13S400227
This is the feeding spindle used when loading the fabric.
Identical to the feeding spindle supplied with the printer.
Used for lubricating the moving parts of the print head and scan
spindle with grease. Identical to the grease pump supplied with
the printer.
Used to secure felt rods or blades to the belt. Identical to the
blade supports supplied with the printer.
Used to apply glue uniformly to the belt. Identical to the blade
supplied with the printer.
These parts are attached to both sides of the belt and used to
prevent glue from leaking out of the belt sides. Identical to the
glue blocks supplied with the printer.
Attach felt and install this in the machine interior for use.
Identical to the felt rod supplied with the printer.
Push this against the belt and scrape off the glue. Identical to
the glue collection bucket supplied with the printer.
Used to keep the felt soaked in ink film remover pressed onto
the belt.
It is equivalent to the one included in the cleaning kit that
comes with the product. Used for cap cleaning.
It is a non-woven cloth for wiping off dirt and other
contaminants from each component.
Use for applying glue.
It is equivalent to the cleaning liquid included in the cleaning kit
supplied with the product. 20 L in volume.
Use when cleaning the caps, suction caps, carriage surfaces
other than the nozzle surface, head cover, and belt side guides.
Identical to the cleaning kit supplied with the product. The
following consumable items are included in one maintenance
set. It is used to clean the areas with ink residue.
Cleaning liquid (x1)
Cup (x1)
Gloves (x16)
Cleaning stick (x50)
Identical to the Waste Ink Bottle supplied with the printer.
Identical to the Wiper Roll supplied with the printer.
Identical to the washing scraper supplied with the printer.
Identical to the mist filter supplied with the printer.
382
Notes