Cleaning The Belt Cleaning Unit - Epson ML-13000 User Manual

ML-13000 User's Manual

Cleaning the Belt Cleaning Unit

After printing on fabric with significant amounts of lint, fibers or debris may get stuck on the cleaning brushes,
washing scraper, or in the cleaning tank, reducing the cleaning effect. Once a week, follow the steps below to
perform cleaning. Even if you clean the parts once a week, clean the parts each time they are clogged with dust or
debris.
Item
Cleaning brushes
Washing scraper
Cleaning tank
Note:
If lint or debris accumulates in the gutter connected to the belt cleaning unit, the gutter may overflow or waste water may
flow back into the cleaning tank. We also recommend that you inspect and clean the guttering on a regular basis.
A
Check that the Home screen on the control panel shows Lift Up for the Belt Cleaning Tank.
B
Hold the handles on the front of the belt cleaning unit to pull it out.
Maintenance
Implementation procedure
Steps 1-3, 12
Steps 1-2, 4, 12
Steps 1-2, 5-12
193