Printing - Epson ML-13000 User Manual

ML-13000 User's Manual
Note:
The approximate print start position in the Y direction is at the second hole from the back of the guide, beside the
belt.
You cannot specify the print start position in the Y direction.
A
Print Start Position (Y direction)

Printing

Use the print tool to perform printing.
"How to Use Epson Edge Print" on page 47
U
c
Important:
Before you start printing, make sure the heated pressure roller is lowered and the fabric is firmly stuck to the belt. If
you start printing while the fabric is raised, the print head could be damaged.
When not using the heated pressure roller, make sure the fabric does not come into contact with the print head.
Note:
If you roll up the print result without drying it, the ink may rub off and smudge. Make sure to dry the print result
thoroughly before rolling it.
If you want to change to a different fabric while there is still some fabric left or the fabric is finished, replace or add
a new fabric roll.
"Replacing the Fabric" on page 96
U
"Adding Fabric" on page 109
U
Basic Operations
95