Timing For Reapplying The Glue - Epson ML-13000 User Manual

ML-13000 User's Manual
M
Allow the glue on the belt to dry for at least eight hours.

Timing for Reapplying the Glue

Determine the time to reapply the glue (removal/application) based on the condition of the fabric and print quality
or the results of measuring the adhesive strength of the glue applied to the belt. See the following when reapplying
glue.
"Removing Glue" on page 295
U
"Applying Glue" on page 316
U
Is the fabric attached to the belt floating?
In the following conditions, the strength with which the belt is attached is weakened.
Maintenance
290