ML-13000
User's Manual
Inspection and Cleaning After Printing
The areas to be inspected after printing are as given below. After inspection, clean or replace parts if necessary.
Inspection locations
Flushing pad
Around the print head
Ink path
Sponge roller
Belt cleaning unit
Turning Off the Power
A
Press and hold the power button on the control panel for 2 seconds or more.
B
When the confirmation screen appears, touch Yes.
Basic Operations
Frequency
Everyday
Every week
Inspection
Reference
Every month
U
Flushing Pad" on page 178
U
Print Head" on page 182
U
Cleaning
Path" on page 186
U
page 191
U
on page 193
133
"Inspecting/Cleaning the
"Inspecting/Cleaning Around the
"Inspecting/Cleaning the Ink
"Drying the Sponge Roller" on
"Cleaning the Belt Cleaning Unit"