Operations Before Starting Work; Inspection Before Turning On The Power - Epson ML-13000 User Manual

ML-13000 User's Manual

Operations Before Starting Work

The workflow before starting the work is as given below.

Inspection before turning on the power

Perform periodic inspections before turning on the power, and clean or replace parts if necessary.
"Inspection Before Turning On the Power" on page 56
U
Checking the exhaust equipment
Exhaust is required during operation to control the temperature and humidity of the machine. Make sure that the machine is
properly ventilated.
Turning On the Power
For details on how to turn on the power, see the following.
"Turning On the Power" on page 57
U
Inspection after turning on the power
Perform periodic inspections after turning on the power, and clean or replace parts if necessary.
"Inspection After Turning On the Power" on page 58
U
Inspection Before Turning On the Power
The areas to be inspected before turning on the power are as given below. After inspection, clean or replace parts if
necessary.
Inspection locations
Around operating parts
Air pressure
Tension roller
Basic Operations
Frequency
Everyday Every week
Reference
Every month
U
Operating Parts" on page 164
U
Pressure" on page 168
U
Roller" on page 204
56
"Checking the Area Around
"Checking/Adjusting the Air
"Applying Tape to the Tension