Epson ML-13000 User Manual page 297

ML-13000 User's Manual
Required Items
Bucket for glue remover
Pump
Rubber spatula or plastic spatula
bags or plastic sheets
Curing tape
!
Warning:
Work environment conditions
❏ Avoid work in high-temperature, high-humidity environments. The glue might not be applied evenly, resulting
in water droplets remaining after belt cleaning.
❏ Work in an environment that is clean and dust-free (meaning dust does not accumulate for 5 to 10 minutes
after cleaning).
Maintenance
Quantity Details/Use
1 Commercially available
1 Commercially available
1 Commercially available
Proper Commercially available
amount
210 cm (8.27 inches)
(width) x 70 cm (2.76
inches) (length)
Thickness: 0.15 mm (0.006
inches) or more
Proper Commercially available
amount
Before starting this procedure, be sure to read the following.U
Regarding Maintenance" on page 160
Container used when pouring glue
remover onto the felt.
Used when pouring glue remover into
the bucket. Use a material that does not
dissolve when exposed to organic
solvent.
Used when scraping the glue. Use a
material that does not dissolve when
exposed to organic solvent.
Used to protect the product bottom. Use
materials that will not dissolve in organic
solvents, such as polyethylene.
Used to protect the product bottom.
297
"Precautions