Epson ML-13000 User Manual page 246

ML-13000 User's Manual
H
Move the rubber roller to the rear side and stick the photography paper perfectly to the belt so that there are
no wrinkles or creases.
I
Close the front cover.
J
Check the on-screen message, and then touch Start.
A check pattern is printed. The actual count of nozzles clogged with Pre Treatment Liquid, Density
Enhancer Liquid, or Over-Coating Liquid is numerically printed.
K
Open the front cover, remove the photography paper, and check the check pattern that was printed.
Example of clean nozzles
❏ Inks other than Pre Treatment Liquid, Density Enhancer Liquid, and Over-Coating Liquid
❏ Pre Treatment Liquid, Density Enhancer Liquid, Over-Coating Liquid
Example of clogged nozzles
❏ Inks other than Pre Treatment Liquid, Density Enhancer Liquid, and Over-Coating Liquid
Maintenance
246