Omron MX2 Series User Manual page 58

1 Overview
3G3MX2-E
Increment key
Decrement key
Enter key
Change of the Number of Digits on LED Data Display
The Digital Operator's LED data display of the 3G3MX2-EV2 Series Inverter is changed to a 5-digit
display. Refer to 3-1-1 Part Names and Descriptions on page 3-5 for information on the LED data
display.
Addition of the Blinking RUN LED Indicator
If the RUN command is input when the Inverter is unable to start operation (such as when the
frequency reference is 0 Hz or an alarm has occurred), the RUN LED blinks. Refer to 3-1-1 Part Names
and Descriptions on page 3-5 for information on the RUN LED indicator.
Addition of Digit Shift Display Mode
The digit shift display mode is added to display parameter data with more than 5 digits on the Digital
Operator.
For details on the digit shift display mode, refer to Digit Shift Display Mode on page 3-11.
While the 3G3MX2-E Series Inverter allows for monitoring data up to the display digits of its Digital
Operator, the 3G3MX2-EV2 Series Inverter is able to monitor data that exceeds the display digits.
Change of Individual digit Input Mode Selection
The individual input mode selection method is changed according to the change of Digital Operator
keys.
The remote Digital Operator (Model: 3G3AX-OP01) allows you to enter the individual input mode by
simultaneously pressing the Increment and Decrement keys, as with conventional models. For details,
refer to Individual Input Mode on page 3-12.
Press the Increment key and the Decrement
key simultaneously.
1 - 26
3G3MX2-E
3G3MX2-EV2
Jog dial The Increment key, Decrement key, and
Enter key are replaced with a Jog dial.
Enter key
3G3MX2-EV2
Press and hold the Enter key for 3 seconds.
Multi-function Compact Inverter 3G3MX2-EV2 User's Manual (I666-E1)
Details