Connections And Functions Of Cx-Drive; Cx-Drive Connection Method - Omron MX2 Series User Manual

3 Operation and Test Run
3-2

Connections and Functions of CX-Drive

The Inverter/Servo support tool CX-Drive is support software to edit the inverter parameter settings.
Installing the OMRON CX-One software on your PC also installs the CX-Drive simultaneously.
The 3G3MX2-EV2 Series Inverter is supported in the following or higher versions of the CX-Drive prod-
uct:
• CX-Drive: Ver. 3.02
This section describes how to connect the CX-Drive to an inverter and provides an overview of its func-
tions.
For details on the functions of the CX-Drive, refer to the "CX-Drive Operation Manual (W453)".
3-2-1

CX-Drive Connection Method

The following figure shows how to connect the 3G3MX2-EV2 Series with the Inverter/Servo support
tool CX-Drive.
Direct Connection via Serial Communications
Connect the CX-Drive directly to the USB connector of the Inverter.
Refer to 3-1-1 Part Names and Descriptions on page 3-5 for information on the USB.
USB
Commercially-available USB cable
(Micro-B)
3 - 16
CX-Drive
Multi-function Compact Inverter 3G3MX2-EV2 User's Manual (I666-E1)