Omron MX2 Series User Manual page 139

3 Operation and Test Run
In the extended function mode U, you can operate the Digital Operator in the same way as in other modes.
However, do not be confused although each parameter number is displayed again for the set value.
Press the Enter key to enter the selected parameter number. Then the display returns to the parameter dis-
play in the extended function mode U.
To display only the user set parameters, set the Display Selection (b037) to 02 (User setting).
3
Multi-function Compact Inverter 3G3MX2-EV2 User's Manual (I666-E1)
3 - 9