Reset Data - Racelogic Motorsport VBOX Touch V2 User Manual

LEDs will be off
The current lap is the same speed as the reference
lap
LEDs will show dull red
The current lap is 2.5 km/h slower than the reference
lap
LEDs will show bright red
The current lap is >5 km/h slower than the reference
lap
Alternatively, if you have selected 10 km/h and the current lap is 5 km/h quicker than the reference lap, the LEDs will
show dull green as it is halfway to the maximum value.
Tap the button to change the setting.

Reset Data

Selecting this option will reset the lap timing data, the lap time history and the reference lap. Once you have
selected Reset, you will see a cancel timeout screen giving you the option to cancel the reset (within 5 seconds) by
pressing the screen. After 5 seconds, the LEDs will briefly flash green twice and the unit will emit an audible
confirmation notification.
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/
v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_-
_VBOX_Touch_(v2%2F%2Fv3)
64