Standing Start - Racelogic Motorsport VBOX Touch V2 User Manual

If enabled, the Main Lap Timing Screen or Basic Lap Timing Screen will display the current live lap time. When
a new lap starts, the previous lap time will be displayed for 5 seconds before it reverts to displaying the current live
lap time. When this is disabled, the previous lap time will be displayed until you start a new lap.
Note: This setting is enabled by default.

Standing Start

When Standing Start is enabled, VBOX Touch can use
the logged position at the start of a movement to trigger
the lap timing. This is particularly suitable for sprint-style
events. In this mode, the Lap Timing will only stop at a
defined finish gate. With standing start enabled, any
existing Start/Finish or start gate will be ignored.
Once enabled, the LEDs will briefly flash green twice
and the unit will emit an audible confirmation notification.
You are then required to return to a Lap Timing Screen
by pressing the Exit button at the bottom left.
Standing start activated cancellation screen
When stationary (<0.5 km/h) for 2 consecutive seconds,
it will display an activation screen. This will ask you to
wait 5 seconds before you move the vehicle. If you press
the screen, move, or lose the satellite lock before the
standing start activation period has expired, the feature
will be cancelled.
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/
v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Lap_Timing_Mode_-
_VBOX_Touch_(v2%2F%2Fv3)
62