Table of Contents
Advertisement
Custom Test
You can choose your own start and end conditions for the test by selecting the Custom Test in the test selection
area. You can then define the start and end speed conditions by pressing the corresponding buttons and using the
presented keypad.
Press the Confirm button to save your selected value or press the Cancel button to return to the Settings screen
without saving.
Notes:
• The maximum input value for speed is 999.9 (1 decimal place only).
• The minimum start speed is 5 km/h or 3.1 mph.
Save the Custom Test by pressing the Confirm button at the bottom right of the screen, or press the Cancel
Button at the bottom left of the screen to go back to the Decel Mode screen without saving.
The name of the selected test will be displayed in the top right corner of the Decel Mode screen. The last defined
uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_-
Start Speed Keypad Example
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/
_VBOX_Touch_(v2%2F%2Fv3)
41
Advertisement
Table of Contents
Need help?
Do you have a question about the Motorsport VBOX Touch V2 and is the answer not in the manual?