Save Results - Racelogic Motorsport VBOX Touch V2 User Manual

You can take a screenshot of the test history by pressing the
Return to the main screen by selecting the Exit button at the bottom left of the screen.
IMPORTANT
A maximum of 127 tests will be displayed in chronological order. However, if you complete more tests, they
will still be recorded on the SD card. Once the limit has been reached, you will see a warning message
advising that further tests will not be saved to the Test History. The message will show again if the unit is
power-cycled. A 'TEST HISTORY FULL' notification will also be shown beneath the Live Speed display. To
view new test history results, press the Reset button.

Save Results

You can also save the results as a .txt or .csv file (depending on the selected option) to the SD card by pressing the
Save button at the bottom of the screen. The unit will emit an audible notification to confirm that the data has been
saved. If the results have could not be saved successfully, for example, no SD card is inserted or the card is full, the
button will flash 3 times and VBOX Touch will emit an audible error notification.
If saved successfully, the file name will include the test type, the date and the time taken from the first completed run
in that session. Along with the test history information described above, the results file also includes average
acceleration information, as well as the latitude and longitude position (in degrees and decimal degrees format)
added to the session header.
Reset
Press the Reset
this button is pressed, the LEDs will briefly flash
notification.
uch_(v2%2F%2Fv3)/User_Guide_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/05_Display_Modes_%E2%80%93_VBOX_Touch_(v2%2F%2Fv3)/Decel_Mode_-
button at the bottom right of the screen to reset all test results shown on the current screen. When
Screenshot button.
green twice and the unit will emit an audible confirmation
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/
_VBOX_Touch_(v2%2F%2Fv3)
48