Table of Contents
Advertisement
Camera menu items (continued)
ALL DATA INITIALIZE [NO, YES]
OSD menu setting values are initialized, along with setting values for
SCENE files 1 to 8/USER files 1 to 3.
However, the following items are not initialized:
- [FREQENCY], [FORMAT], and [SFP+ MODE] in [BASIC CONFIG]
- Setting items in [NETWORK]
- [FORMAT SELECT] for the output connectors in [OUTPUT]
- PRESET information (information registered for 100 items)
- Setting values related to the various NETWORK items that are
available for setting from the web screen
- Setting items in [DATE/TIME]
VERSION
SYSTEM VERSION
Display the version for overall system of the unit.
HOUR METER
Display the [HOUR METER] screen that displays the operation
history.
OPERATION
Display the cumulative hours of operation of the unit (in hourly units).
FAN1
Display the cumulative hours of operation of cooling fan 1 (on the
LENS unit side) (in hourly units).
FAN2
Display the cumulative hours of operation of cooling fan 2 (on the
base unit side) (in hourly units).
HDMI STATUS
CONNECT
Displays the connection status of the HDMI connector.
One of the following is displayed according to the product
specifications of the device or monitor connected.
UNCONNECT
Not connected.
HDMI
Connected via HDMI.
DVI
Connected via DVI.
FORMAT
Displays the format of the images being output via the HDMI
connector.
The same format is displayed as is specified in [OUTPUT] – [HDMI] –
[FORMAT].
VIDEO SAMPLING
The video sampling of the images being output via the HDMI
connector is displayed.
One of the following is displayed according to the menu settings and
the product specifications of the device or monitor connected.
– – –
Displayed when [CONNECT] is other than HDMI.
RGB 8bit
Displayed when [CONNECT] is HDMI and output is RGB
8bit.
YPbPr 4:2:2/
Displayed when [CONNECT] is HDMI and output is
10bit
YPbPr 4:2:2/10bit.
YPbPr 4:2:0/
Displayed when [CONNECT] is HDMI and output is
8bit
YPbPr 4:2:0/8bit.
<NOTE>
• Even if the video sampling is set in [OUTPUT] – [HDMI] – [VIDEO
SAMPLING], it may not be possible to output using the specified
format due to the product specifications of the HDMI connected
device or monitor.
This item displays the status of the video sampling actually being
output.
MONITOR
Displays the status of the device or monitor connected to the HDMI
connector.
One of the following is displayed according to the product
specifications of the device or monitor connected.
– – –
Displayed when [CONNECT] is other than HDMI.
AVAILABLE
This indicates that [CONNECT] is HDMI and the
device or monitor connected supports the format
output by this unit.
UNSUPPORT UHD
This indicates that [CONNECT] is HDMI and the
device or monitor connected does not support the
UNSUPPORT UHD
format output by this unit.
60P/50P
UNSUPPORT UHD
60P 4:2:2
UNSUPPORT UHD
50P 4:2:2
UNSUPPORT UHD
60P 4:2:0
UNSUPPORT UHD
50P 4:2:0
UNSUPPORT
HLG/2020
UNSUPPORT HLG
UNSUPPORT 2020
UNSUPPORT
This indicates that [CONNECT] is HDMI and the
FORMAT
device or monitor connected is not supported for a
reason other than those shown above.
ERROR STATUS
Display the [ERROR STATUS] screen that displays the status of
errors.
LENS [NO ERROR, ERROR]
This displays the error status of the LENS.
PAN/TILT [NO ERROR, ERROR]
This displays the error status of the PAN/TILT drive section.
FAN1 [NO ERROR, ERROR]
Display the error status of cooling fan 1 (on the LENS unit side).
FAN2 [NO ERROR, ERROR]
Display the error status of cooling fan 2 (on the base unit side).
TEMPERATURE
[NO ERROR, HIGH TEMPERATURE, SENSOR ERROR]
This displays the status of temperature related errors.
HIGH
Temperature is high.
TEMPERATURE
SENSOR ERROR
The temperature sensor may have malfunctioned.
82
Advertisement
Table of Contents
