Table of Contents
Advertisement
Web screen configurations (continued)
CLIP(+) [00 to 63]
Set the level of clipping of the detail signal in the plus direction
(brighter direction).
This is only enabled when [DETAIL] is set to [On].
Factory settings: 0
CLIP(–) [00 to 63]
Set the level of clipping of the detail signal in the minus direction
(darker direction).
This is only enabled when [DETAIL] is set to [On].
Factory settings: 0
KNEE APERTURE LEVEL [00 to 39]
Adjust the level of detail for very bright parts.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 0
DETAIL KNEE [00 to 15]
Adjust the detail component of knee.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 0
LEVEL DEPRENDED SWITCH [Off, On]
Set On/Off for the level of reduction in detail in dark parts.
This is only enabled when [DETAIL] is set to [On].
Factory settings: Off
LEVEL DEPENDENT [00 to 15]
Set the level of reduction in detail in dark parts.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 0
DARK DETAIL SWITCH [Off, On]
Set On/Off for the control that adds detail in dark parts.
This is only enabled when [DETAIL] is set to [On].
Factory settings: Off
DARK DETAIL [0 to 7]
Set the level of detail in dark parts.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 3
z DOWNCON SETTING
Adjust the contours and colors of images down-converted from 4K to
HD.
This is enabled when [Format] is one of the following:
2160/59.94p, 2160/29.97p, 2160/23.98p, 2160/24p, 2160/50p,
2160/25p
<NOTE>
• For all of the DOWNCON SETTING items, setting is not possible
when [V-LOG] is [On] and [V-LOG PAINT SW] is [Off].
CHROMA
CHROMA LEVEL SWITCH [Off, On]
Set On/Off for the chroma level control.
Factory settings: Off
CHROMA LEVEL [–100% to 40%]
Set here the color intensity (chroma level) of the images.
Factory settings: 0
DETAIL SETTING
DETAIL [Off, On]
Turn On/Off the contour (sharpness of images) adjustment of images.
Factory settings: On
MASTER DETAIL [–31 to +31]
Make adjustments the contour correction level (master).
This is only enabled when [DETAIL] is set to [On].
Factory settings: 0
H DETAIL LEVEL [00 to 63]
Adjust the contour correction level in the horizontal direction.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 7
V DETAIL LEVEL [00 to 63]
Adjust the contour correction level in the vertical direction.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 7
PEAK FREQUENCY [12.4MHz to 37.1MHz]
Set the boost frequency of detail.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 22.4MHz
V DETAIL FREQUENCY [00 to 31]
Set the boost frequency of detail (vertically).
00: Low frequency
to
31: High frequency
When a high frequency is selected, the detail effect is added to
subjects with more definition.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 10
CRISP [00 to 63]
Set the level of noise reduction for the detail signal.
This is only enabled when [DETAIL] is set to [On].
Factory settings: 10
154
Advertisement
Table of Contents
