Table of Contents
Advertisement
Web screen configurations (continued)
z PEDESTAL
<NOTE>
• For all of the PEDESTAL items, setting is not possible when [V-LOG]
is [On] and [V-LOG PAINT SW] is [Off].
MASTER PEDESTAL [–200 to +200]
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
Factory settings: 0
R PEDESTAL [–800 to +800]
This enables the R pedestal to be adjusted.
Factory settings: 0
G PEDESTAL [–800 to +800]
This enables the G pedestal to be adjusted.
Factory settings: 0
B PEDESTAL [–800 to +800]
This enables the B pedestal to be adjusted.
Factory settings: 0
PEDESTAL OFFSET [Off, On]
Set the pedestal level of the Rch, Gch, and Bch when the auto black
balance has been adjusted.
Off
Set the pedestal level to [0] for [R PEDESTAL],
[G PEDESTAL], and [B PEDESTAL].
On
Maintain the values set for each of [R PEDESTAL],
[G PEDESTAL], and [B PEDESTAL].
Factory settings: Off
z CHROMA
<NOTE>
• For all of the CHROMA items, setting is not possible when [V-LOG] is
[On] and [V-LOG PAINT SW] is [Off].
CHROMA LEVEL SWITCH [Off, On]
Select Off/On for the color intensity setting for images.
Off
Set the color intensity setting for images to Off.
On
Set the color intensity setting for images to On.
CHROMA LEVEL [–100% to 40%]
Set here the color intensity (chroma level) of the images.
Factory settings: 0%
z COLOR TEMP SETTING / V‑LOG COLOR TEMP SETTING
<NOTE>
• For all of the COLOR TEMP SETTING / V-LOG COLOR TEMP
SETTING items, setting is not possible when [V-LOG] is [On] and
[V-LOG PAINT SW] is [Off].
COLOR TEMP ACH/BCH
Set the color temperature when the [WHITE BALANCE MODE] is
[AWB A] or [AWB B].
Varying the output balance of Ach and Bch enables the varying of the
color temperature.
COLOR TEMP ACH [2000K to 15000K]
This displays the color temperature when [WHITE BALANCE MODE]
is [AWB A].
Factory settings: 3200K
R GAIN ACH [–400 to +400]
This enables adjustments to R Gain when [WHITE BALANCE
MODE] is [AWB A].
Factory settings: 0
B GAIN ACH [–400 to +400]
This enables adjustments to B Gain when [WHITE BALANCE
MODE] is [AWB A].
Factory settings: 0
G AXIS ACH [–400 to +400]
You can adjust the gain in the G-Mg direction when the [WHITE
BALANCE MODE] is [AWB A].
Factory settings: 0
COLOR TEMP BCH [2000K to 15000K]
This displays the color temperature when [WHITE BALANCE MODE]
is [AWB B].
Factory settings: 3200K
R GAIN BCH [–400 to +400]
This enables adjustments to R Gain when [WHITE BALANCE
MODE] is [AWB B].
Factory settings: 0
B GAIN BCH [–400 to +400]
This enables adjustments to B Gain when [WHITE BALANCE
MODE] is [AWB B].
Factory settings: 0
G AXIS BCH [–400 to +400]
You can adjust the gain in the G-Mg direction when the [WHITE
BALANCE MODE] is [AWB B].
Factory settings: 0
146
Advertisement
Table of Contents
