Table of Contents
Advertisement
Camera menu items (continued)
SHUTTER SPEED
SHUTTER SW [OFF, ON]
Set ON/OFF for the shutter function.
AUTO SHUTTER [OFF, ON]
Set ON/OFF for the automatic shutter.
AUTO SHUTTER LIMIT [1/100, 1/120, 1/250]
Set the maximum shutter value when AUTO SHUTTER is operating.
This is only enabled when [AUTO SHUTTER] is set to [ON].
SHUTTER MODE [STEP, SYNCHRO]
Select the shutter mode.
STEP
The step shutter is set (the steps can be changed).
SYNCHRO
The synchro shutter is set (the setting can be changed
continuously).
SHUTTER SPEED
The shutter speeds that can be set are listed below.
When [STEP] is selected as the
[SHUTTER MODE]
60p/59.94p/ 59.94i
1/100, 1/120, 1/125, 1/250, 1/500, 1/1000,
mode
1/1500, 1/2000
29.97p mode
1/48, 1/50, 1/60, 1/96, 1/100, 1/120, 1/125,
1/250, 1/500, 1/1000, 1/1500, 1/2000
23.98p mode
1/48, 1/50, 1/60, 1/96, 1/100, 1/120, 1/125,
1/250, 1/500, 1/1000, 1/1500, 1/2000
50p/50i mode
1/60, 1/100, 1/125, 1/250, 1/500, 1/1000,
1/1500, 1/2000
25p mode
1/48, 1/50, 1/60, 1/96, 1/100, 1/125, 1/250,
1/500, 1/1000, 1/1500, 1/2000
119.88p mode
1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
100p mode
1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
SYNCHRO SCAN
This is used to adjust the shutter speed in the mode which was
selected as the [SHUTTER MODE] setting.
When a higher shutter speed is selected, fast-moving subjects do not
become blurred easily but the images will be darker.
The shutter speeds that can be set are listed below.
When [SYNCHRO] is selected as the
[SHUTTER MODE]
60p/59.94p/59.94i
60.0 Hz to 7200 Hz
mode
29.97p mode
30.0 Hz to 7200 Hz
23.98p mode
24.0 Hz to 7200 Hz
50p/50i mode
50.0 Hz to 7200 Hz
25p mode
25.0 Hz to 7200 Hz
119.88p mode
120.1 Hz to 7200 Hz
100p mode
100.1 Hz to 7200 Hz
PEDESTAL
<NOTE>
• For all of the PEDESTAL items, setting is not possible when
[V-LOG] is [ON] and [V-LOG PAINT SW] is [OFF].
MASTER PEDESTAL [–200 to +200]
This item is used to adjust the black level (adjust the pedestal).
These parts become darker when a negative setting is selected and,
conversely, lighter when a positive setting is selected.
R PEDESTAL [–800 to +800]
This enables the R pedestal to be adjusted.
G PEDESTAL [–800 to +800]
This enables the G pedestal to be adjusted.
B PEDESTAL [–800 to +800]
This enables the B pedestal to be adjusted.
PEDESTAL OFFSET [OFF, ON]
Set the pedestal level of the Rch, Gch, and Bch when the auto black
balance has been adjusted.
OFF
Set the pedestal level to [0] for [R PEDESTAL],
[G PEDESTAL], and [B PEDESTAL].
ON
Maintain the values set for each of [R PEDESTAL],
[G PEDESTAL], and [B PEDESTAL].
CHROMA
<NOTE>
• For all of the CHROMA items, setting is not possible when [V-LOG]
is [ON] and [V-LOG PAINT SW] is [OFF].
CHROMA LEVEL SW [OFF, ON]
Set ON/OFF for the chroma level control.
CHROMA LEVEL [–100% to 40%]
Set here the color intensity (chroma level) of the images.
60
Advertisement
Table of Contents
