Panasonic HEVC Advance AW-UE160WP Operating Instructions Manual page 116

Web screen configurations (continued)
z BAR ID
BAR ID [Off, On]
Select Off/On for the ID display on the color bar.
Factory settings: Off
BRIGHTNESS [0 to 100%]
Set the text color for the camera ID on the color bar.
Factory settings: 100%
ID1 POSITION V [0 to 5]
Specify the font units for the start position for display of the camera
ID1 (vertically: line number) on the color bar.
Factory settings: 0
ID1 POSITION H [0 to 15]
Specify the font units for the start position for display of the camera
ID1 (horizontally: column number) on the color bar.
Factory settings: 0
ID1
Set the character string for the [BAR ID].
Maximum 16 characters
(Alphanumeric characters, spaces, ! # % & ' ( )
_ ~ $ @ |)
ID2 POSITION V [0 to 5]
Specify the font units for the start position for display of the camera
ID2 (vertically: line number) on the color bar.
Factory settings: 1
ID2 POSITION H [0 to 15]
Specify the font units for the start position for display of the camera
ID2 (horizontally: column number) on the color bar.
Factory settings: 0
ID2
Set the character string for the [BAR ID].
Maximum 16 characters
(Alphanumeric characters, spaces, ! # % & ' ( )
_ ~ $ @ |)
OFFSET V [0 to 89]
OFFSET H [0 to 79]
<NOTE>
• BAR ID is displayed only through the SDI, HDMI, SMPTE ST2110, and
High bandwidth NDI outputs. It is not displayed with IP transmission
(H.264/H.265/M-JPEG).
+ , - . / : ; < = > ? [ ]
*
+ , - . / : ; < = > ? [ ]
*
116
Make fine adjustments to the display position of the [BAR ID] (offset
position of the pixels in the font: vertically).
Factory settings: 0
Make fine adjustments to the display position of the [BAR ID] (offset
position of the pixels in the font: horizontally).
Factory settings: 0