Table of Contents
Advertisement
Web screen configurations (continued)
z HDR PAINT
HLG MODE [FIX, VAR]
Select image quality setting mode for HDR.
Factory settings: FIX
<NOTE>
• This is disabled when [V-LOG] is [On].
SDR CONVERT MODE [FIX, VAR]
Select the mode for converting to SDR.
FIX
Fixed mode
VAR
Variable mode
Factory settings: FIX
GAMMA/BLACK GAMMA
BLACK GAMMA SW [Off, On]
Select On/Off for the gamma curve for dark areas.
Factory settings: Off
MASTER BLACK GAMMA [–32 to +32]
Adjust the master black gamma correction level.
Factory settings: 0
R BLACK GAMMA [–32 to +32]
Make adjustments to the black gamma correction level for the Rch.
Factory settings: 0
B BLACK GAMMA [–32 to +32]
Make adjustments to the black gamma correction level for the Bch.
Factory settings: 0
KNEE
<NOTE>
• For all of the KNEE items, setting is not possible when [V-LOG] is
[On] and [V-LOG PAINT SW] is [Off].
• For all of the KNEE items, setting is not possible when [HDR] is
[On].
• When [DRS] is enabled, the knee setting is disabled.
KNEE SW [Off, On]
Set On/Off for the operating mode for gradation compression (knee).
Factory settings: On
KNEE POINT [–25.00% to 25.00% (0.25% step)]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [KNEE SW] is set to [On].
Factory settings: 0
KNEE SLOPE [–25.00% to 25.00% (0.25% step)]
Set the incline of knee.
This is only enabled when [KNEE SW] is set to [On].
Factory settings: 0
SDR CONVERT
The setting is disabled when [FIX] is selected in [SDR CONVERT
MODE] and it cannot be set.
GAIN [0dB, –5dB, –6dB, –7dB, –8dB, –9dB, –10dB, –11dB, –12dB]
Set the gain of SDR images.
Factory settings: – 6
POINT [000 to 100]
Set the image level to start SDR image compression.
Factory settings: 0
SLOPE [000 to 127]
Set the incline for compression of SDR images.
Factory settings: 0
BLACK OFFSET [–100 to +100]
Adjust the black level offset of SDR images.
Factory settings: 0
148
Advertisement
Table of Contents
