Maintenance Screen [Maintenance] - Panasonic HEVC Advance AW-UE160WP Operating Instructions Manual

Web screen configurations (continued)

Maintenance screen [Maintenance]

On this screen, you can check the system logs, check the version of the
software, initialize the unit, etc.
The Maintenance screen consists of four settings: [System log],
[Maintenance], [Product info.] and [Backup].
„
System log screen [System log]
A maximum of 1000 event logs and a maximum of 100 error logs can be
stored in the unit's internal memory.
When this maximum number has been exceeded, the old logs are
overwritten successively by the new logs.
The logs are cleared when the unit's power is turned off.
<NOTE>
• When the system log screen is displayed, the event log is displayed.
System log [Event log, Error log1, Error log2]
Switch the display between event logs and error logs.
The event log display is updated when you click the [Execute] button.
Event log Displays the event logs.
Error log1 Displays the error logs.
Error log2 Displays the error logs.
[Event log]
No.
Displays the log sequence numbers.
"1" indicates the latest information, and up to 1000 logs can be saved.
Date & Time
Displays the dates and times when the events occurred.
The dates and times when the events occurred are indicated in 24-
hour format according to the clock of the unit.
Operation time
Displays the dates and times when the events occurred.
The dates and times when the events occurred are indicated with the
hour meter (0h to 99999h) of the unit.
Event code
Displays the event code numbers.
Description
Displays the event descriptions.
Display examples:
– <Power> Power on.
– <Stream> H.264 ch1 Play.
– <Stream> H.264 ch1 Stop.
[Error log1, Error log2]
No.
Displays the log sequence numbers.
"1" indicates the latest information, and up to 100 logs can be saved.
Date & Time
Displays the dates and times when the errors occurred.
The dates and times when the errors occurred are indicated in
24 hour format according to the clock of the unit.
Operation time
Displays the dates and times when the errors occurred.
The dates and times when the errors occurred are indicated with the
hour meter (0h to 99999h) of the unit.
Error code
Displays the error code numbers.
Error description
Displays the error descriptions.
Display examples:
– Motor Driver Error
– Temp Sensor Error
186