Table of Contents
Advertisement
Camera menu items (continued)
KNEE
<NOTE>
• For all of the KNEE items, setting is not possible when [V-LOG] is
[ON] and [V-LOG PAINT SW] is [OFF].
• For all of the KNEE items, setting is not possible when [HDR] is
[ON].
• When [DRS] is enabled, the knee setting is disabled.
KNEE [OFF, ON]
Set ON/OFF for the operating mode for gradation compression
(knee).
KNEE MODE [AUTO, MANUAL]
Set the operating mode for gradation compression (knee).
AUTO
Automatically set the knee point and knee slope.
MANUAL
Manually set the knee point and knee slope.
KNEE MASTER POINT
[80.00% to 110.00% (0.25% step)]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [KNEE MODE] is set to [MANUAL].
KNEE R POINT [–25.00% to 25.00% (0.25% step)]
Make positional settings for the compression level (knee point) of
the Rch against the [KNEE MASTER POINT].
This is only enabled when [KNEE MODE] is set to [MANUAL].
KNEE B POINT [–25.00% to 25.00% (0.25% step)]
Make positional settings for the compression level (knee point) of
the Bch against the [KNEE MASTER POINT].
This is only enabled when [KNEE MODE] is set to [MANUAL].
KNEE MASTER SLOPE [00 to 199]
Set the incline of knee.
This is only enabled when [KNEE MODE] is set to [MANUAL].
KNEE R SLOPE [–99 to +99]
Set the incline of the Rch against the [KNEE MASTER SLOPE].
This is only enabled when [KNEE MODE] is set to [MANUAL].
KNEE B SLOPE [–99 to +99]
Set the incline of the Bch against the [KNEE MASTER SLOPE].
This is only enabled when [KNEE MODE] is set to [MANUAL].
AUTO KNEE RESPONSE [1 to 8]
Set the speed of the auto knee response.
The response speed increases the lower the setting value.
WHITE CLIP
<NOTE>
• For all of the WHITE CLIP items, setting is not possible when
[V-LOG] is [ON] and [V-LOG PAINT SW] is [OFF].
• For all of the WHITE CLIP items, setting is not possible when [HDR]
is [ON].
WHITE CLIP [OFF, ON]
Turn the white clip function OFF/ON.
MASTER WHITE CLIP LEVEL [80% to 109%]
Set the master white clip level.
R WHITE CLIP LEVEL [–15% to +15%]
Set the white clip level of the Rch against the
[MASTER WHITE CLIP LEVEL].
B WHITE CLIP LEVEL [–15% to +15%]
Set the white clip level of the Bch against the
[MASTER WHITE CLIP LEVEL].
HI‑COLOR [OFF, ON]
Set the control of the mode to expand the dynamic range of colors.
This improves the color reproducibility in very bright parts.
HI-COLOR LEVEL [1 to 32]
Set the level of the mode to expand the dynamic range of colors.
DRS
<NOTE>
• For all of the DRS items, setting is not possible when [V-LOG] is
[ON] and [V-LOG PAINT SW] is [OFF].
DRS [OFF, ON]
Set ON/OFF for the DRS function which makes appropriate
corrections when recording video that has a large light/dark contrast.
EFFECT DEPTH [1 to 5]
Set the effect level of the DRS function. The effect level increases
as the number increases.
63
Advertisement
Table of Contents
