Table of Contents
Advertisement
Web screen configurations (continued)
z KNEE
<NOTE>
• For all of the KNEE items, setting is not possible when [V-LOG] is [On]
and [V-LOG PAINT SW] is [Off].
• For all of the KNEE items, setting is not possible when [HDR] is [On].
KNEE [OFF, ON]
Set ON/OFF for the operating mode for gradation compression
(knee).
Factory settings: ON
KNEE MODE [AUTO, MANUAL]
Set the operating mode for gradation compression (knee).
AUTO
Automatically set the knee point and knee slope.
MANUAL
Manually set the knee point and knee slope.
Factory settings: AUTO
KNEE MASTER POINT
[80.00% to 110.00% (0.25% step)]
Set the compression level (knee point) position for high-brightness
video signals.
This is only enabled when [KNEE MODE] is set to [MANUAL].
Factory settings: 0.95
KNEE R POINT
[–25.00% to 25.00% (0.25% step)]
Make positional settings for the compression level (knee point) of the
Rch against the [KNEE MASTER POINT].
This is only enabled when [KNEE MODE] is set to [MANUAL].
Factory settings: 0
KNEE B POINT
[–25.00% to 25.00% (0.25% step)]
Make positional settings for the compression level (knee point) of the
Bch against the [KNEE MASTER POINT].
This is only enabled when [KNEE MODE] is set to [MANUAL].
Factory settings: 0
KNEE MASTER SLOPE [00 to 199]
Set the incline of knee.
This is only enabled when [KNEE MODE] is set to [MANUAL].
Factory settings: 130
KNEE R SLOPE [–99 to +99]
Set the incline of the Rch against the [KNEE MASTER SLOPE].
This is only enabled when [KNEE MODE] is set to [MANUAL].
Factory settings: 0
KNEE B SLOPE [–99 to +99]
Set the incline of the Bch against the [KNEE MASTER SLOPE].
This is only enabled when [KNEE MODE] is set to [MANUAL].
Factory settings: 0
AUTO KNEE RESPONSE [1 to 8]
Set the speed of the auto knee response.
The response speed increases the lower the setting value.
Factory settings: 4
z WHITE CLIP
<NOTE>
• For all of the WHITE CLIP items, setting is not possible when [V-LOG]
is [On] and [V-LOG PAINT SW] is [Off].
• For all of the WHITE CLIP items, setting is not possible when [HDR]
is [On].
WHITE CLIP [OFF, ON]
Set ON/OFF for the white clip function.
Factory settings: OFF
MASTER WHITE CLIP LEVEL [80% to 109%]
Set the master white clip level.
Factory settings: 1.09
R WHITE CLIP LEVEL [–15% to +15%]
Set the white clip level of the Rch against the [MASTER WHITE CLIP
LEVEL].
This is only enabled when [WHITE CLIP] is set to [ON].
Factory settings: 0
B WHITE CLIP LEVEL [–15% to +15%]
Set the white clip level of the Bch against the [MASTER WHITE CLIP
LEVEL].
This is only enabled when [WHITE CLIP] is set to [ON].
Factory settings: 0
HI COLOR [OFF, ON]
Set the control of the mode to expand the dynamic range of colors.
This improves the color reproducibility in very bright parts.
Factory settings: OFF
HI COLOR LEVEL [1 to 32]
Set the level of the mode to expand the dynamic range of colors.
Factory settings: 32
z DRS
<NOTE>
• For all of the DRS items, setting is not possible when [V-LOG] is [On]
and [V-LOG PAINT SW] is [Off].
DRS [OFF, ON]
Set ON/OFF for the DRS function which makes appropriate
corrections when recording video that has a large light/dark contrast.
Factory settings: OFF
EFFECT DEPTH [1 to 5]
Set the effect level of the DRS function. The effect level increases as
the number increases.
Factory settings: 5
152
Advertisement
Table of Contents
