Table of Contents
Advertisement
Camera menu items (continued)
FLARE
<NOTE>
• For all of the FLARE items, setting is not possible when [V-LOG] is
[ON] and [V-LOG PAINT SW] is [OFF].
FLARE [OFF, ON]
Set OFF/ON for flare compensation.
MASTER FLARE [–200 to 0 to +200]
Adjust the master flare.
R FLARE [–200 to 0 to +200]
Adjust the Rch flare.
G FLARE [–200 to 0 to +200]
Adjust the Gch flare.
B FLARE [–200 to 0 to +200]
Adjust the Bch flare.
GAMMA/BLACK GAMMA
<NOTE>
• For all of the GAMMA/BLACK GAMMA items, setting is not possible
when [V-LOG] is [ON] and [V-LOG PAINT SW] is [OFF].
• For all of the GAMMA/BLACK GAMMA items, setting is not possible
when [HDR] is [ON].
GAMMA [OFF, ON]
Select ON/OFF for the gamma mode.
GAMMA MODE SELECT
[HD, NORMAL, CINEMA1, CINEMA2]
Select the gamma curve type.
HD
HD (High Definition) video gamma characteristic.
NORMAL
Standard gamma characteristic.
CINEMA1
High contrast gamma characteristic.
CINEMA2
Sedate gamma characteristic.
MASTER GAMMA [0.15 to 0.75 (0.01 step)]
Adjust the gamma correction level.
Specifying smaller values results in a gentler gamma curve for the
slope of low-brightness areas and sharper contrast.
Specifying larger values results in an expanded gradient for dark
areas and produces brighter images. The gamma curve for low-
brightness areas will be steeper, and contrast will be softer.
R GAMMA [–75 to +75]
Set the gamma for the Rch.
B GAMMA [–75 to +75]
Set the gamma for the Bch.
BLACK GAMMA [OFF, ON]
Select ON/OFF for the gamma curve for dark areas.
MASTER BLACK GAMMA [–48 to +48]
Adjust the master black gamma correction level.
– 48 to – 1
Compresses dark parts.
+1 to +48
Expands dark parts.
R BLACK GAMMA [–20 to +20]
Make adjustments to the black gamma correction level for the Rch.
B BLACK GAMMA [–20 to +20]
Make adjustments to the black gamma correction level for the Bch.
BLACK GAMMA RANGE [1 to 3]
Set the maximum level of compression/expansion for the gamma
curve for dark areas.
1
About 20%
2
About 30%
3
About 40%
INITIAL GAMMA [4.0, 4.5, 5.0]
Set the rising slope for the gamma curve.
This can only be set when [GAMMA MODE SELECT] is [HD].
62
Advertisement
Table of Contents
