Tunturi PLATINUM CORE User Manual page 32

English
Sled Programs quick select buttons
In stop mode, press button to select a sled function program and
open the program associated setting menu.
Sled programs are: Goal Distance, Goal Time, Manual, Custom,
Strength Test
Treadmill programs quick select buttons
In stop mode, press button to select a treadmill function program and
open the program associated setting menu.
Sled programs are: Limit mode, P1-P5, P6-P10, User, HRC, Goal
Training, Backward walking
Left hand handle bar buttons - Stop
Function is the same as for the "Stop / Pause" button located on the
main button board.
Left hand handle bar buttons - Incline Minus
- Decreases the incline (0 ~ 15 -1)
- Change values in programming mode.
Left hand handle bar buttons - Incline Plus
- Increases the incline (0 ~ 15 +1).
- Change values in programming mode.
Left hand handle bar buttons - Incline hot keys
- Incline Hot Keys are set as 2, 4, 6, 8, 10, 12
- Example when treadmill is used in treadmill function mode.
The incline level changes from any level to 6 by pressing the Incline
Hot Key 6.
Right handle bar Speed / Sled - Start
Function is the same as for the "Start" button located on the main
button board.
Right handle bar Speed / Sled - Minus
- Decreases the speed (0.5 ~ 20.0 km/h).
- Pressing once decreases the speed 0.1 km/h.
- Pressing and holding for two seconds will decrease the speed
faster.
- Change values in programming mode.
Right handle bar Speed / Sled - Plus
- Increase the speed (0.5 ~ 20.0 km/h).
- Pressing once increases the speed 0.1 km/h.
- Pressing and holding for two seconds will increase the speed faster.
- Change values in programming mode.
Right handle bar Speed / Sled - Hot keys
- "Speed/ Sled" keys are set as 3, 6, 9, 12, 15, 18.
- Example when treadmill is used in treadmill function mode.
The speed changes from any speed to 9 km/h by pressing the
Speed Hot Key 9.
Specific Sled mode button functions
Handle bar Speed / Sled - Minus
- Decreases the sled resistance (1 ~ 100%).
- Pressing once to decreases the resistance by 1%.
- Pressing and holding for two seconds will decrease the resistance
faster.
- Scroll programs and change values in programming mode.
Handle bar Speed / Sled - Plus
- Increase the sled resistance (1 ~ 100%).
- Pressing once to increase the resistance by 1%.
- Pressing and holding for two seconds will increase the resistance
faster.
- Scroll programs and change values in programming mode.
Handle bar Speed / Sled - Hot keys
When the treadmill is set to Sled mode function, the hot keys are
programmed to represent
Quick button 3 15%
Quick button 6 30%
Quick button 9 45%
- When pressing a quick button the resistance is instantly set to the
commencing resistance.
- Example when treadmill is used in sled mode, and button 9 is
pressed, the resistance will change to 45% directly.
Specific Limit Speed mode button functions
Handle bar Speed / Sled - Minus
- Decreases the speed (0.1 ~ 2.5 km/h).
- Pressing once decreases the speed 0.1 km/h.
- Pressing and holding for two seconds will decrease the speed
faster.
Handle bar Speed / Sled - Plus
- Increase the speed (0.1 ~2.5 km/h).
- Pressing once increases the speed 0.1 km/h.
- Pressing and holding for two seconds will increase the speed faster.
Handle bar Speed / Sled - Hot keys
When the treadmill is set into Limit speed mode function, the hot
keys are programmed to represent
Quick button 3 0.6
Quick button 6 0.9
Quick button 9 1.2
- When pressing a quick button the speed is instantly set to the
commencing speed
- Example when treadmill is used in Limit speed mode.
The speed changes from any speed to 1.2 km/h by pressing the
Speed Hot Key 9.
Specific backwards mode button functions
Handle bar Speed / Sled - Minus
- Decreases the speed (0.1 ~ 2.5 km/h).
- Pressing once decreases the speed 0.1 km/h.
- Pressing and holding for two seconds will decrease the speed
faster.
Handle bar Speed / Sled - Plus
- Increase the speed (0.1 ~2.5 km/h).
- Pressing once increases the speed 0.1 km/h.
- Pressing and holding for two seconds will increase the speed faster.
Handle bar Speed / Sled - Hot keys
When the treadmill is set into Backwards mode function, the hot keys
are programmed to represent
Quick button 3 0.6
Quick button 6 0.9
Quick button 9 1.2
- When pressing a quick button the speed is instantly set to the
commencing speed
- Example when treadmill is used in backwards speed mode.
The speed changes from any speed to 1.2 km/h by pressing the
Speed Hot Key 9.
3 2
Quick button 12 60%
Quick button 15 75%
Quick button 18 90%
Quick button 12 1.5
Quick button 15 1.8
Quick button 18 2.1
Quick button 12 1.5
Quick button 15 1.8
Quick button 18 2.1