Tunturi PLATINUM CORE User Manual page 28

English
- Only use the equipment in environments with ambient
temperatures between 10 °C~35 °C. Only store the equipment in
environments with ambient temperatures between 5 °C~45 °C.
- Do not use or store the equipment in humid surroundings. The air
humidity must never be more than 80%.
- Only use the equipment for its intended purpose. Do not use the
equipment for other purposes than described in the manual.
- Do not use the equipment if any part is damaged or defective. If a
part is damaged or defective, contact your dealer.
- Keep your hands, feet and other body parts away from the moving
parts.
- Keep your hair away from the moving parts.
- Wear appropriate clothing and shoes.
- Keep clothing, jewellery and other objects away from the moving
parts.
- Make sure that only one person uses the equipment at a time. The
equipment must not be used by persons weighing more
than 150 kg (330 lbs).
- Do not open equipment without consulting your dealer.
Electrical safety
(Only for equipment with electric power)
- Before use, always check that the mains voltage is the same as the
voltage on the rating plate of the equipment.
- Do not use an extension cable.
- Keep the mains cable away from heat, oil and sharp edges.
- Do not alter or modify the mains cable or the mains plug.
- Do not use the equipment if the mains cable or the mains plug
is damaged or defective. If the mains cable or the mains plug is
damaged or defective, contact your dealer.
- Always fully unwind the mains cable.
- Do not run the mains cable underneath the equipment. Do not run
the mains cable underneath a carpet. Do not place any objects on
the mains cable.
- Make sure that the mains cable does not hang over the edge of a
table.
- Make sure that the mains cable cannot be caught accidentally or
tripped over.
- Do not leave the equipment unattended when the mains plug is
inserted into the wall socket.
- Do not pull the mains cable to remove the mains plug from the wall
socket.
- Remove the mains plug from the wall socket when the equipment
is not in use, before assembly or disassembly and before cleaning
and maintenance.
⚠ CAUTION
• If voltage varies by ten percent (10%) or more, the performance
of your treadmill may be affected. Such conditions are not
covered under your warranty. If you suspect the voltage is low,
contact your local power company or a licensed electrician for
proper testing.
⚠ CAUTION
• Route the power mains cord away from any moving part of
the treadmill including the elevation mechanism and transport
wheels.
Grounding Instructions
This product must be grounded. If the treadmill's electrical system
should malfunction or breakdown grounding provides a path of least
resistance for electric current, reducing the risk of electric shock. This
product is equipped with a cord having an equipment-grounding
plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes
and ordinances.
⚠ WARNING
• Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician
or serviceman if you are in doubt as to whether the product is
properly grounded. Do not modify the plug provided with the
product if it will not fit the outlet; have a proper outlet installed
by a qualified electrician.
Assembly instructions
Description illustration A
The illustration shows what the trainer will looks like after the
assembly is completed.
You can use this as a reference during your assembly, but do follow
the assembly steps always in the correct sequence as showed in the
illustrations.
Description illustration B
The illustration shows what components and parts you should find
when un-boxing your product.
‼ NOTE
• Small parts can be hidden/ packed in hollow spaces in the
Styrofoam product protection
• If a part is missing, contact your dealer.
Description illustration C
The illustration shows the hardware kit that comes with your product.
The hardware kit contains bolts, washers, screws , nuts etc. and the
required tools to properly fit your trainer.
Description illustration D
The illustrations shows you in the correct following order how to
assembly your trainer best.
‼ NOTE
• Part numbers shown in the assembly steps are commencing
with the spare part drawing that can be found in the online full
version user manual.
⚠ WARNING
• Assemble the equipment in the given order.
• Carry and move the equipment with at least two persons.
⚠ CAUTION
• Place the equipment on a firm, level surface.
• Place the equipment on a protective base to prevent damage to
the floor surface.
• Refer to the illustrations for the correct assembly of the
equipment.
‼ NOTE
• Save the tools provided with this product, after you completed
the product assembly,
for future service purposes.
2 8