Tunturi PLATINUM CORE User Manual page 36

English
Goal Distance
- Press Goal Training button once to open: Goal Distance.
- Display show distance "0.1" (KM) as the default or the latest set
goal as it memorize the latest set distance as your preferred.
Use "Plus or Minus" buttons to set your desired goal.
± 0.1 KM Range: 0.1 ~ 99.9 KM.
Press and hold "Plus or Minus" button for fast adjustment ± 1.0
km.
- Press "Start" to start your workout.
- The workout will stop when set distance target is reached.
Goal Time
- Press Goal Training button twice to open: Goal Time.
- Display show time "1" (Min) as the default, or the latest set goal as
it memorize the latest set distance as your preferred.
- Use "Plus or Minus" buttons to set your desired goal.
± 1 min. Range:1 ~ 99 min.
Press and hold "Plus or Minus" button for fast adjustment ± 1 min.
Press "Start" to start your workout.
- The workout will stop when set time target is reached.
Goal Calories
- Press Goal Training button three times to open: Goal Calories.
- Display show calories "10" (K.Cal) as the default, or the latest set
goal as it memorize the latest set distance as your preferred..
- Use "Plus or Minus" buttons to set your desired goal.
± 1 K.Cal. Range: 10 ~ 999 K. Cal.
Press and hold "Plus or Minus" button ± 10 K.Cal.
- Press "Start" to start your workout.
- The workout will stop when set time target is reached.
Backward walking
The Backward walking function sets the treadmill in a backwards
motion. Therewith you can do a backwards walking exercise.
You can also turn around and use this function to walk forward in a
high incline setting.
- Press Backward Walking button to select Backward Walking mode
program.
- Press "Start" to start your workout.
- Treadmill will start at the speed of 0.1 KM/H in a backwards
direction
- "Speed/ Sled" Plus or Minus buttons can be use to change the
workout speed at any time.
± 0.1 KM/H Range: 0.1 ~ 2.5 KM/H.
- The workout will stop when user stops the workout manually.
Bluetooth & APP
- This console can connect with an APP on a smart device by
Bluetooth (iOS & Android).
- Establish the Bluetooth connection only via the connection mode
on the installed APP on your smart device.
‼ NOTE
• Tunturi only provides the option to connect your fitness console
throughout a bluetooth connection. Therefore Tunturi cannot
be held responsible for damage, or malfunctioning of products
other than Tunturi products.
• Check the website for extra information.
Cleaning and maintenance
⚠ WARNING
• Your trainer requires monthly maintenance, even when not being
used.
• Before cleaning and maintenance, remove the mains plug from
the wall socket.
• Do not use solvents to clean the equipment.
- Do not block the ventilation openings. Keep the ventilation
openings clear from dust, dirt and other obstructions.
- Clean the equipment with a soft, absorbent cloth after each use.
- Clean the visible parts of the equipment with a vacuum cleaner
with a small suction nozzle
- Regularly check that all screws and nuts are tight.
⚠ CAUTION
• We recommend to use indoor shoes only on your treadmill.
When you don't have these we do recommend to check the
soles of your footwear before using them on your treadmill.
The treadmill is not sustainable for dirt from outdoors.
General Cleaning
Dirt, dust, and pet hair can block air inlets and accumulate on the
running belt. On a monthly basis: vacuum underneath your treadmill
to prevent build-up.
UNPLUG POWER CORD BEFORE THIS TASK.
Belt Dust
This occurs during normal break-in or until the belt stabilizes. Wiping
off excess dust with a damp cloth will minimize build-up.
Belt and Running Deck
Your treadmill uses a very high-efficient low-friction bed.
Performance is maximized when the running deck is kept clean and
free from dust and dirt. Dirt and dust particles between running deck
and running belt will damage your running deck surface affecting
your performance and product lifetime.
How to clean running deck
Use a soft, dry, non-abrasive cloth to wipe the edge of the belt and
the area between the belt edge and frame. try to reach under the
running belt edges too, to remove the dirt build up on the edges too.
How to clean running belt surface
Firstly use a nylon scrub brush to remove the loose particles from the
running belt surface. Than use wrung out damp cloth (no cleaners or
abrasives) to gentle clean the top of the textured belt. Allow the belt
to fully dry before using.
‼ NOTE
• When your belt too dirty to clean with water only, you can use a
mild soap, but never a lubricant solvent.
• Prevent that the solution comes between running deck and
running belt at all times.
This should be done on a regular basis to extend belt and running
deck life.
3 6