Adding New Users - Danfoss AK-EM 100 Configuration Manual

AK-EM 100 Installation Guide
1. Press the 'New User' button.
2. Fill out the necessary details. Fields with an asterisk need to be filled in to allow the user's details to be
saved.
3. Some selections have a several options, these are:
Group - select the group to which the user will belong to.
Language - select the default language
for the user.
Username - Enter new user's username.
Password - Enter new user's password.
This will have to be changed after the
user first logs in.
HACCP Type - Not Applicable to the AK-
EM100
Expire Day - enter a date of expiry. Leave
blank for unlimited access.
Start Page - Choose a page from the list
where the user will go to every time they
log on. The drop down list will become
active once a user group is selected, and
will contain a list of pages based on the
user groups access.
Alarm Level - Select the type of alarms the
user will have access to.
Beeps On New Alarm - Choose whether to have the machine beep every time a new alarm is added
to the list.
Week One - The week number appears as a digit preceding the date ranges in the "Week" drop-down
for Graph, Historical Alarms, and Event Log reports. The user's preference for week one is configured
here when adding new users, by selecting one of the following entries from the drop-down:
Week One
ISO 8601
Canada/US
Middle East
4. When finished and all fields have been completed, the 'Save' button will become available. Press it to
add the user to the list.
5. Existing users can be edited further by clicking on the user.
6. To Delete a user, click on the user and press the 'Delete' button.
The list of users can be displayed differently by clicking on the column headers to display them
alphabetically.
The modem settings section is where the set up connections to the AK-EM 100 are made for remote or on
First Day of Week
Monday
Sunday
Saturday
© Danfoss 05-2011
First week
4th January
1st January
1st January
RC8BX402 19