Related Manuals for Danfoss SonoSelect 10
Summary of Contents for Danfoss SonoSelect 10
- Page 1 Installation & User Guide SonoSelect and SonoSafe energy meters www.heating.danfoss.com 03/2017 © Danfoss VUIGB602...
- Page 2 Installation & User Guide SonoSelect and SonoSafe Note! To ensure latest version of declaration, please visit danfoss.com. 2 | © Danfoss | Energy Meters | 2017.03 VUIGB702...
-
Page 3: Table Of Contents
Disposal................15 VUIGB702 © Danfoss | Energy Meters | 2017.03 | 3... -
Page 4: Inside The Box
(cooling) the calculator must be mounted separately from the flow sensor to prevent condensation. • Avoid installation stress from pipes and fittings. • Flush the system. 4 | © Danfoss | Energy Meters | 2017.03 VUIGB702... -
Page 5: Identification Of Installation: Supply/Return Pipe Installation
Rotation in pipe axis: Flow sensor should be angled where air can be collected. in 45 to 315° to avoid air collection in flow sensor. Mounting orientation, calculator 4 x 90° VUIGB702 © Danfoss | Energy Meters | 2017.03 | 5... -
Page 6: Mounting Of O-Ring And Temperature Sensor
18.5 mm G¾ 24 mm 30.5 mm Note: Tolerance on machined dimensions = ± 0.5 mm. Pipe fittings for use with probe type DS (Direct Short). : provision for security sealing. 6 | © Danfoss | Energy Meters | 2017.03 VUIGB702... -
Page 7: Communication (Expansion Modules)
SonoSelect and SonoSafe Communication modules Modules in general To adapt the meter for various applications SonoSelect 10 and SonoSafe 10 features a slot for mounting communication modules. Each module features its own µ-controller and is powered by its own battery. - Page 8 • Current power • Supply temperature • SupplyTemperature • Return temperature • ReturnTemperature • Difference temperature • CurrentTime • Enclosure temperature • Current time • Hour counter factory • Hour counter OK 8 | © Danfoss | Energy Meters | 2017.03 VUIGB702...
- Page 9 To ensure IP protection class connecting cable outer Ø4.2 ± 0.1 mm Cable specification jackets must be Communication cables delivered with heat meter. 1.0 m Cable ends are stripped with crimped ferule. VUIGB702 © Danfoss | Energy Meters | 2017.03 | 9...
-
Page 10: Installation Of Module/Cable
Close enclosure making sure that no cables inter- Reset tamper alarm via Sono- fere with rubber sealing and other internal parts. App for SonoSelect 10. For module configuration, see SonoApp user guide. 10 | © Danfoss | Energy Meters | 2017.03 VUIGB702... -
Page 11: Battery
2 times rubber sealing or within 120 seconds. other internal parts. Reset tamper alarm (E13) via SonoApp for SonoSelect 10. VUIGB702 © Danfoss | Energy Meters | 2017.03 | 11... -
Page 12: Commissioning
Factory seal IP class Calculator IP65 (SonoSelect) / IP54 (SonoSafe) Flow sensor IP65 Temperature sensor IP65 Note: The IP class can be compromised if cables are subjected to angled tension. 12 | © Danfoss | Energy Meters | 2017.03 VUIGB702... -
Page 13: Function Overview
LOOP 1 click Current Supply temp. Return temp. Display test/All on Power Flow LOOP 2 click History log Accounting date Monthly date 1 >> Monthly date 12 LOOP 3 click VUIGB702 © Danfoss | Energy Meters | 2017.03 | 13... -
Page 14: Display Explanation
Battery low (less than 12 months) High flow > qss Supply Temperature Error Battery consumption too high Return Temperature Error Display overflow (energy/volume) Absolute/Difference temperature outside Communication module error accumulated range Low transducer signal 14 | © Danfoss | Energy Meters | 2017.03 VUIGB702... -
Page 15: Device Overview
Flow sensor (including transducer and Brass, stainless steel, PPS Metal recovery liner) Transducer PZT, stainless steel, PEI Approved deposit for PZT Other plastic parts PC, PPS, PEI, TPE Plastic recovery VUIGB702 © Danfoss | Energy Meters | 2017.03 | 15... - Page 16 • www.heating.danfoss.com Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.