Restore Configuration; User Administration; Group Management - Danfoss AK-EM 100 Configuration Manual

2.5 Restore Configuration

2.6 User Administration

18 RC8BX402
Saved configuration files can be used to restore the configuration settings of the whole site instead of
individual assets. This includes all assets, settings, alarms, images etc.
To restore configuration to a previously saved setting:
1. Browse to the locally saved file and press the 'Go' button.
2. Wait until the whole system has been completely restored - depending upon the size of the backup
this could take minutes or hours.
User administration is used for creating new users or editing existing users of the system. Different users
can belong to different groups, which allow them to have access to different parts of the system. So the
first thing to do in user administration is to create the user groups so that users can be allocated into
groups.

2.6.1 Group Management

1. Click on the icon (right) to display the group management page.
2. Enter a name for the new group name and then press the 'New' button to add it to the group list.
3. Make sure the new group is highlighted, then select which options the group will have access to.
4. Groups can have access to certain sub sections of available options, so remember to select the
sections if necessary.
5. Press the 'Save' button at the bottom of the page when finished to store the group. Repeat the
process for adding more groups.
When the groups have been added, close the Group window.
2.6.2 Adding New Users
© Danfoss 05-2011
AK-EM 100 Installation Guide