Favourites And Settings; Event Log - Danfoss AK-EM 100 Configuration Manual

4.3 Favourites and Settings

4.4 Event Log

38 RC8BX402
View Reason Exceptions
To make a Standard Reason an exception, press the link in the Exception column. The Exceptions page will
allow you to overide a standard reason and not allow it to come through onto the alarm list.
An exception to a standard reason can be targeted to a specific asset, so in the event of an alarm for that
particular asset and reason, it will be ignored. Select the asset, the reason and the exception text that will
overide the default text, then the severity level.
Press the 'Reason Administration' button to go back to the Standard Reason table.
Refer to the Graphical Interface Guide for more details regarding the features here.
The Event Log provides a record of actions by any of the users within a specified time period and displays
a table of the actions taken, on what page and what time. There are several ways of displaying the
information by selecting a report type over a time period.
1. Select the time period from the left hand side - week, month or quarter.
2. Select the user whose actions you wish to view.
3. Select the report type:
List - Shows each action and what page was affected, including when certain processes were
started.
Summary - Displays the most frequently viewed page over the system by the user.
Page - Displays the most frequently viewed page over the system
Role - Similar to the above, except it displays the pages alphabetically based on the user role.
4. Press the 'GO' button to display the report. Below is an example of the List report.
© Danfoss 05-2011
AK-EM 100 Installation Guide