Download
Share
Print this page
Danfoss AKS 4100 Instruction
  1. Manuals
  2. Brands
  3. Danfoss Manuals
  4. Measuring Instruments
  5. AKS 4100
  6. Instruction

Danfoss AKS 4100 Instruction

Cable version
Hide thumbs Also See for AKS 4100:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Steel wire
insertion length
Inner diameter
Total length of guided blades after cutting
* No need to cut guided blades
Reference point
50 mm
(2 in.)
36 mm
(1.4 in.)
© Danfoss A/S (AC-SMC/MWA), 01-2012
Instruction
Type AKS 4100/4100U
Fig. 1
2 screws -
3 mm Allen key.
Torgue : 5-7 Nm (3.7-5.2 lb/ft)
Danfoss
M84H0003_1
2 in. pipe
52 mm
2.05 in.
45 mm
1.77 in.
Danfoss
M84H0006_1
Reference point
DKRCI.PI.SC0.D2.02 / 520H5637
Cable version
Fig. 2b
Fig. 2a
Standpipe / Columm
3 in. pipe
78 mm
70 mm
12 mm (0.5 in.)
5mm (0.2 in.)
5mm (0.2 in.)
4 in. pipe
3.07 in.
102 mm*
2.76 in.
92 mm*
Danfoss
M084H0002_1
Fig. 2c
Danfoss
M84H0004_1
Fig. 3
4.02 in.*
3.62 in.*
Fig. 4
1

Advertisement

loading

Related Manuals for Danfoss AKS 4100

Summary of Contents for Danfoss AKS 4100

  • Page 1 2.76 in. 92 mm* 3.62 in.* * No need to cut guided blades Danfoss M84H0006_1 Reference point Reference point 12 mm (0.5 in.) 50 mm (2 in.) 36 mm (1.4 in.) Fig. 4 © Danfoss A/S (AC-SMC/MWA), 01-2012 DKRCI.PI.SC0.D2.02 / 520H5637...

  • Page 2: Reference Point

    Fig. 5 Danfoss M84H0031_1   Danfoss Cover stop Connector M84H0009_1 2.5 mm/0.2 in. for HMI Allen Key Fig. 7  Loosen cover stop    Danfoss Fig. 8 Fig. 6 M84H0010_1 DKRCI.PI.SC0.D2.02 / 520H5637 © Danfoss A/S (AC-SMC/MWA), 01-2012...
  • Page 3 AKS 41/41U to AKS 4100/4100U AKS 41/41U with a.c supply to AKS 4100/4100U with d.c supply AKS 41/41U AKS 4100/4100U (–) x y z 24 V a.c (L) 24 V d.c (+) 24 V d.c (–) 24 V a.c (N)
  • Page 4 **** OUTPUT I (mA) is display option. Will represent the level of refrigerant,in 4-20 milliampere, scaled (entered in QUICK SETUP) according to: SCALE 4 mA (4 mA), SCALE 20 mA (20 mA) (see fig. 5). DKRCI.PI.SC0.D2.02 / 520H5637 © Danfoss A/S (AC-SMC/MWA), 01-2012...
  • Page 5 HCFC, HFC and non corrosive gases/liquids. – Bottom dead zone (see fig. 5) Adjustment of the cable probe AKS 4100/4100U can also be used with R744 (210 mm (8.3 in.)) = 2837 mm (111.7 in.) ) in the coaxial version. Please see the Please observe that the stainless 20 mA Setting for Max.
  • Page 6 3.5 mA • Press • Press to decrease the value or AKS 4100 increase the value. 2.0.0 __________ Press to confirm. AKS 4100 Enter password: SET OUTPUT 8 mA AKS 4100 2.1.0 INFORMATION DKRCI.PI.SC0.D2.02 / 520H5637 © Danfoss A/S (AC-SMC/MWA), 01-2012...
  • Page 7 109 → 113 1.11 43 → 45 109 → 113 1.12 46 → 48 114 → 119 1.12 46 → 48 114 → 118 1.13 49 → 50 120 → 122 1.13 © Danfoss A/S (AC-SMC/MWA), 01-2012 DKRCI.PI.SC0.D2.02 / 520H5637...
  • Page 8 3 times to return to default 3.3.0 CONFIG/RESET screen. • Press Default screen appears: AKS 4100 • Press 3.0.0 AKS 4100 ________ DISTANCE AKS 4100 5000 mm 3.3.1 RESET FACTORY Factory reset completed www.danfoss.com/ir DKRCI.PI.SC0.D2.02 / 520H5637 © Danfoss A/S (AC-SMC/MWA), 01-2012...

This manual is also suitable for:

Aks 4100u