Welding Parameter Setting; Setting The Welding Current (Absolute/Percentage) - EWM Tetrix 352 AC/DC Synergic Operating Instructions Manual

Machine description – quick overview
Machine control – Operating elements
4.2.4

Welding parameter setting

During the welding parameter setting process, the parameter value being set is displayed on the left-hand
display. The right-hand display shows the "Factory setting" or a variation of it upwards or downwards. Dis-
plays, e.g. when setting the start current, and their meanings:
Display
4.2.5

Setting the welding current (absolute/percentage)

The welding current for the ignition, secondary, end and hot start current can be set as a percentage of
the main current AMP or as an absolute value. To select the display use the parameter
guration menu > see 5.9 chapter.
24
Meaning of the symbols shown in the right-hand display
Increase parameter value:
To restore the factory settings.
Factory setting:
Parameter value is on the optimum setting
Reduce parameter value:
To restore the factory settings.
in the confi-
099-000140-EW501
30.01.2024