Creating A New Job In The Memory Or Copying A Job - EWM Tetrix 352 AC/DC Synergic Operating Instructions Manual

5.3.2

Creating a new JOB in the memory or copying a JOB

Copying a pre-defined welding task from the fixed memory (JOBs 1 to 128) to the free memory
(JOBs 129-256):
It is normally possible to adjust all 256 JOBs individually. However, it is a good idea to assign
specific JOB numbers in the free memory (JOB 128 to 256) for specific welding tasks.
099-000140-EW501
30.01.2024
Design and function
Organising welding tasks (Mode "JOB Manager")
Figure 5-39
53