Parameter Assignment; Upper Scaling Settings; Functions; Process Values - Siemens SITRANS FC330 Operating Instructions Manual

Parameter assignment

8.1

Upper scaling settings

Setting
Default
Process value (2.2) is set to Mass flow, Volume flow, Standard volume flow, Fraction A (Mass flow or
Volume flow) or Fraction B (Mass flow or Volume flow)
Setting
Default
Process value (2.4.2.2) is set to Density
Related
The Mass flow, Volume flow, Standard volume flow or Fraction range and default setting are
dependent on the selected Process value (2.2), the selected process value Unit (2.2.1.1 for
Mass flow, 2.2.2.1 for Volume flow, 2.2.3.1 for Standard volume flow, 2.2.7.2 for Fraction (Mass
flow), or 2.2.7.3 for Fraction (Volume flow)) and the sensor size.
The Density or Fluid temperature range and default setting are dependent on the selected
Process value (2.2) and the selected process value Unit (2.2.5.1 for Density and 2.2.6.1 for
Medium temperature).
See also
Dimension drawings (Page 217)
Parameters are identified by name and organized into function groups.
Parameters accessible via the local display are followed by the device menu number in
parenthesis. Parameters not followed by a number are accessible only via remote operation.
8.2

Functions

8.2.1

Process values

The process values are updated every 10 ms (100 Hz update rate) synchronous with the DSP
update cycle.
SITRANS FC330
Operating Instructions, 01/2019, A5E44030648-AB
The range is shown as minimum and maximum values in the HMI.
See HMI menu structure (Page 237).
The range is shown as minimum and maximum values in the HMI.
1600.0 [kg/m ]
3
8
127