Fuji Electric ZSJ Instruction Manual page 57

3.5 Setting of auto zero calibration
3.5.1 Auto zero calibration
tion" screen from the user mode, and the
the or the
ENT
screen that appears, perform the value
entry or the setting. For the value entry
or setting change, use the
the right.
Description of setting items
To close "setting of Auto Zero Calibration"
To close the "Setting of Auto Zero Calibration"
or cancel this mode midway, press the
A previous screen will return.
-
Set Auto
Zero Cal.
or the
Set Auto
Zero Cal.
End of Auto Zero Calibration Setting
ESC
key.
48
Select setting item
Start Time SUN 12:00
Cycle 07
Flow Time 300 sec.
ON / OFF OFF
Time : MON 12:34
Auto Zero Calibration Run
( )
Set Start Time
Start Time SUN 12:00
Cycle 07
Flow Time 300 sec.
ON / OFF OFF
Time : MON 12:34
Auto Zero Calibration Run
day
ENT
Press the or
the key, and
day
date and time are
displayed
alternately.
ENT
INZ-TN2ZSJ-E