Fuji Electric ZSJ Instruction Manual page 52

3.4 Setting of auto calibration
3.4.1 Auto calibration
screen from the user mode, and the
the or the
ENT
screen that appears, perform the value
entry or the setting. For the value entry
or setting change, use the
the right.
After setting, press the
setting value.
Description of setting items
To close "Setting of Auto calibration"
To close the "Setting of Auto calibration" or cancel
this mode midway, press the
A previous screen will return.
INZ-TN2ZSJ-E
or the
ENT
ESC
key.
43
Set Auto Cal. Select setting item
Start Time SUN
Cycle 07
Flow Time
ON / OFF OFF
Time : MON 12:34
Auto Calibration Run
Set Auto Cal. Set Start Time
Start Time SUN
Cycle 07
Flow Time
ON / OFF OFF
Time : MON 12:34
Auto Calibration Run
End of Auto Calibration Setting
12:00
day
ENT
( )
12:00
Press the or
day the key, and
date and time are
displayed
alternately.
ENT