Table of Contents
Advertisement
Step 2 Configure the settings for the alarm center parameters. See Table 4-60.
Parameter
Enable
Protocol Type
Host IP
Port
Self-Report Time
Step 3 Click Apply to complete the settings.
4.12.10Register
You can register the Device into the specified proxy server which acts as the transit to make it
easier for the client software to access the Device.
Step 1 Select Main Menu > NETWORK > REGISTER.
The REGISTER interface is displayed. See Figure 4-212.
Figure 4-211
Description
Enable the alarm center function.
In the Protocol Type list, select protocol type. The default is
ALARM CENTER.
The IP address and communication port of the PC installed with
alarm client.
In the Self-Report Time list, select time cycle and specific time for
uploading alarm.
Table 4-60
Local Basic Operation 282
Advertisement
Table of Contents
