Table of Contents
Advertisement
Step 2 In the Channel list, select a channel that you want to configure face detection function,
and then enable it.
Step 3 Configure the parameters. See Table 4-26.
Parameter
Description
This series NVR products support AI by Camera only. AI by Camera means the
Type
connected camera does all the AI analytics, and then gives the results to the
NVR.
Check the box to enable Face RoI function, system displays human face at the
Face RoI
enhanced way.
Click Setting to draw areas to filter the target.
You can configure two filtering targets (maximum size and minimum size). When
Rule
the target is smaller than the minimum size or larger than the maximum size, no
alarms will be activated. The maximum size should be larger than the minimum
size. Left click to drag the four angles to adjust the size.
Configure the period and in the set time range, the corresponding configuration
Period
item will be linked to start the alarm.
Figure 4-123
Table 4-26
Local Basic Operation 179
Advertisement
Table of Contents
