Dahua DHI-NVR5208-4KS2 User Manual page 290

Browser to manage and control the Device from the software.
Preparations
Install the software that can manage and control the SNMP, such as MIB Builder and

MG-SOFT MIB Browser
 Obtain the MIB files that correspond to the current version from the technical support.
Configuration Steps
Step 1 Select Main Menu > NETWORK > SNMP.
The SNMP interface is displayed. See Figure 4-209.
Step 2 Configure the settings for the SNMP parameters. See Table 4-58.
Parameter
Enable
Figure 4-209
Description
Enable the SNMP function.
Table 4-58
Local Basic Operation 279