Dahua DHI-NVR5208-4KS2 User Manual page 85


The pattern that you want to set must cross at least four grids.

If you do not want to configure the unlock pattern, click Skip.

Once you have configured the unlock pattern, the system will require the unlock
pattern as the default login method. If you skip this setting, enter the password for
login.
Step 7 Set security questions. See Table 4-2.

After configuration, if you forgot the password for admin user, you can reset the
password through the reserved email address or security questions. For details
about resetting the password, see "4.1.3 Reset Password".

If you do not want to configure the settings, disable the email address and security
questions functions on the interface.
Password
Description
Protection Mode
Enter the reserved email address.
In the Email Address box, enter an email address for password
Email Address reset. If you forget the password, enter the security code that you will
get from this reserved email address to reset the password of admin.
Refer to " 4.15.1.2 Modify Password" for detailed information.
Configure the security questions and answers.
Security If you forget the password, enter the answers to the questions can
Questions allow you reset the password. Refer to " 4.15.3 Reset Password "
for detailed information.
Step 8 Click Save to complete the device initialization setup.
Figure 4-4
Table 4-2
Local Basic Operation 74