Dahua DHI-NVR5208-4KS2 User Manual page 160

A preset will be added for this tour.

You can repeat adding more presets.

Click Del Preset to delete the preset for this tour. This operation can be repeated to
delete more presets. Some protocols do not support deleting.
4.4.3.3 Configuring Patterns
Step 1 On the Expanded PTZ Control Panel, click
The PTZ interface is displayed.
Step 2 Click the Pattern tab.
The Pattern interface is displayed. See Figure 4-88.
Step 3 In the Pattern box, enter the value for pattern.
Step 4 Click Start to perform the directions operations. You can also go to the PTZ Control
Panel to perform the operations of adjusting zoom, focus, iris, and directions.
Step 5 On the PTZ interface, click End to complete the settings.
4.4.3.4 Configuring AutoScan
Step 1 On the Expanded PTZ Control Panel, click
The PTZ interface is displayed.
Step 2 Click the Border tab.
The Border interface is displayed. See Figure 4-89.
.
Figure 4-88
.
Local Basic Operation 149