When system is detecting HDD, click Stop Detect to stop current detection. Click Start
Detect to detect again.
4.13.6.2 Detect Report
After the detect operation, you can go to the detect report to view corresponding information.
Replace the malfunction HDD in case there is data loss.
Step 1 Select Main Menu > STORAGE > HDD DETECT > Detect Report.
The Detect Report interface is displayed. See Figure 4-221.
Step 2 Click
The Details interface is displayed. You can view detecting results and S.M.A.R.T reports.
See Figure 4-222 and Figure 4-223.
Figure 4-221
.
Local Basic Operation 292