Dahua DHI-NVR5208-4KS2 User Manual page 107

Parameter Description
Add the device by manually configuring settings such as IP address,
Manual Add
channel selection.
Added Device Displays the added devices. You can edit and delete the device, and
List view the device information.
Select the check box of the added device, and then click Delete to
Delete
delete the added device.
Select the searched devices and then click Import to import the
Import
devices in batches.
Select the added devices and then click Export. The exported
Export
devices information is saved into the USB storage device.
 Manual Add
1) Click Manual Add.
The Manual Add interface is displayed. See Figure 4-29.
2) Configure parameters. See Table 4-8.
Parameter Description
In the Channel list, select the channel that you want use on the
Channel
Device to connect the remote device.
In the Manufacturer list, select the manufacturer of the remote
Manufacturer
device.
In the IP Address box, enter the IP address of remote device.
IP Address
Figure 4-29
Table 4-8
Local Basic Operation 96