Table of Contents
Advertisement
After setting RS-232 parameters, the NVR can use the COM port to connect to other device to
debug and operate.
Step 1 Select MAIN MENU > SYSTEM >RS232.
The RS232 interface is displayed. See Figure 4-235.
Step 2 Configure parameters. See Table 4-66.
Parameter
Function
Figure 4-235
Table 4-66
Description
Select serial port control protocol.
Console: Upgrade the program and debug with the console
and mini terminal software.
Keyboard: Control this Device with special keyboard.
Adapter:
Connect
transmission of data.
Protocol COM: Configure the function to protocol COM, in
order to overlay card number.
PTZ Matrix: Connect matrix control.
Different series products support different RS232 functions.
with
PC
directly
Local Basic Operation 303
for
transparent
Advertisement
Table of Contents
