Table of Contents
Advertisement
Parameter
Description
Check the box to enable RoI function, system displays human face at the
RoI
enhanced way.
Click Setting to draw areas to filter the target.
You can configure two filtering targets (maximum size and minimum size).
Rule
When the target is smaller than the minimum size or larger than the maximum
size, no alarms will be activated. The maximum size should be larger than the
minimum size. Left click to drag the four angles to adjust the size.
Configure the period and in the set time range, the corresponding
Period
configuration item will be linked to start the alarm.
Target
Face
Click Target Face Database, system displays face database list. Select a
Database
database from the dropdown list to compare.
Step 5 Set the Target Face Database.
Step 6 （Optional）Click
alarm linkage will trigger.
Step 7 Click
to set the alarm linkage. See Figure 4-125.
Refer to "4.7.3 Database" for human target database settings information.
Step 8 Configure the parameters. See Table 4-28.
Parameter
Description
Configure the period and in the set time range, the corresponding configuration
Period
item will be linked to start the alarm.
Table 4-27
to modify the similarity. The lower the number is, the easier the
Figure 4-125
Table 4-28
Local Basic Operation 182
Advertisement
Table of Contents
