Table of Contents
Advertisement
Define for several days of a week: Click
Define the period by editing.
1)
There are six periods for you to set for each day.
Under Copy, select All to apply the settings to all the days of a week, or select
2)
Step 5 Click Apply button to complete setup.
After set the heat map parameters, go to Main Menu > INFO > EVENT > HEAT MAP
to view heat map report. Refer to "4.7.1.8 Heat map" for detailed setup information.
4.7.2.9 ANPR
System uses the video recognition technology to extract the plate number on the surveillance
video and then compare it with the specified plate information. System can trigger an alarm once
there is a matched result.
You can set different plate recognition rule, alarm linkage actions in different environments
(blacklist, whitelist and regular).
Step 1 Select Main Menu > AI > PARAMETERS > ANPR.
The ANPR interface is displayed. See Figure 4-152.
icon switches to
. You can define the period for the selected days
simultaneously.
Click the
of the corresponding date, and then set the period on the
pop-up interface. Click OK to save.
specific day(s) that you want to apply the settings to.
Click Apply to save the settings.
Figure 4-152
before each day one by one, the
Local Basic Operation 214
Advertisement
Table of Contents
