Service Mode (Magicolor 2400W); Service Mode Entry Procedure; Toner Cartridge Removal Mode - Konica Minolta magicolor 2400W Service Manual

13. Service Mode (magicolor 2400W)

13. Service Mode (magicolor 2400W)

13.1 Service Mode entry procedure

NOTE
• Ensure appropriate security for the Service Mode entry procedure. It should
NEVER be given to any unauthorized person.
13.1.1

Toner Cartridge removal mode

• This mode is used for manually removing and/or replacing a specific color of Toner Car-
tridge or all four Toner Cartridges.
A. Procedure
1. Hold down the Cancel key for 10 seconds or longer.
2. With the Cancel key held down, hold down the Rotate Toner key for 10 seconds or
longer.
3. When all LED indicators are blinking rapidly, release the Cancel and Rotate Toner keys.
4. Hold down the Rotate Toner key for another 10 seconds or longer.
5. The cyan Toner Cartridge moves into the proper position, so it can be removed.
6. Remove the cyan Toner Cartridge, if necessary.
7. Open and close the Upper Cover. Each time you do this, another Toner Cartridge
moves into the proper position, so it can be removed in this order: cyan, black, yellow,
magenta.
114
Field Service Ver. 4.0 Feb. 2006