Advertisement
5
Replenishment and Replacement of Consumables
5-1. What Are Consumables?
Consumables are parts that require processing such as replenishment, disposal, and
replacement of this system. The main processing of consumables is as follows:
Toner bottle replacement, Waste toner box replacement, Staple needle
replenishment/disposal, *Glue pellet replenishment, Humidification tank water supply,
Trimming scrap disposal
* Staple needle disposal: Dispose of needle scraps generated when staple needles are cut
to suit the thickness of the booklet.
* Glue pellets: Granular glue for perfect binder.
Staple needle
replenishment
FS
Staple needle
disposal
5-2. Consumables Replacement Procedure (Video)
This section explains the following typical 3 replacement procedures with a video.
Replacing a toner bottle
Replacing staple needles
* Each consumables replacement procedure can be viewed in
Replenishment/Replacement Procedure"
Trim scrap
disposal
TU-510
Glue pellet
replenishment
PB-503
Replacing a waste toner box
* For information about how to handle a waste
toner box, contact your service representative.
in the following page.
Humidification tank
water supply
RU-518m
Machine
Waste toner box
replacement
"5-3. Consumables
Toner bottle
replacement
PFU
12
Advertisement
